ThermalRock Eclipse

As a smaller division of ThermalTake, ThermalRock's aluminum Eclipse pays many design traits to other ThermalTake cases. Breaking off from tradition though, the front of this one is primarily taken over by a CD holder, which includes a blank red CD-R. No, it is not an actual drive or reader of any sort, unfortunately; it simply holds a CD for storage and looks.


Click to enlarge.

To get at the real drives, the front of the Eclipse opens up with a dual-hinge design and reveals four 5¼” and two 3½” bays.


Click to enlarge.

Notice how the Eclipse uses several different finishes to give it a unique look that's classy, yet will still appeal to most gamers out there. The revealed front for instance is a sparkle black not unlike a lot of guitar or even automotive finishes.


Click to enlarge.

Power and reset buttons are hidden to clean up the look of the case when closed, and towards the bottom, the vents for the intake fan can be clearly seen. Getting back to the front before opening the doors, we can take a look at the intake vents there as well along with a couple of other items.

Besides the plastic-embossed "ECLIPSE" insignia, there are also strips that will light up showing that the case has power and there is hard drive activity above the vents as well. Turning the case to the side slightly gives us a better look at the port cluster, which may or may not be the best placement for one's particular setup.

We really wish that manufacturers would space the ports out a bit more on the clusters like this, since more and more devices are coming out that have little to no cable at all, making plugging in more than one peripheral difficult or even impossible. Moving on, there is also the option of locking the entire front bezel here on the side. When unlocked, the bezel can be swung open to allow unrestricted access to the removable dust filter.

Turning the case 180 degrees, we can see how the Eclipse looks from the rear, and are happily surprised to find massive thumbscrews in typical ThermalTake/ThermalRock fashion.


Click to enlarge.

We can also tell from this one picture that there are two included fans with the Eclipse, both of which are 120mm in size.

Antec Sonata II (cont’d) ThermalRock Eclipse (cont’d)
Comments Locked

48 Comments

View All Comments

  • RupertS - Thursday, September 8, 2005 - link

    The power supply is a good part of the total value of the case. Also, some of the cases may work better (cooling, sound) with the power supply they come with.

    Hard to compare prices like this.
  • johnsonx - Thursday, September 8, 2005 - link

    Ditto that... this complaint has been leveled before of course:

    Anandtech should at least mention what power supply is (or can be) included with the case, and give some sort of subjective rating of same. For example, the Aspire case is most often available with a 420W power supply (usually a mere $15 or so more than the PS-less version), but I've heard it's crap... but maybe it isn't; I'd like Anandtech to tell me.

    Likewise, the Sonata II ALWAYS (AFAIK) includes a SmartPower 2.0 450... doesn't that add significantly to the value equation? (granted, it'd be better if it were a TruePower 380 like the old Sonata, but a SmartPower 2.0 is nothing to scorn)

  • ElFenix - Thursday, September 8, 2005 - link

    everyone should read the reviews on SPCR before setting up a system on this case. the reviews are very thorough and tests it in multiple configurations, and it turns out there are things you can do to improve its thermal performance by quite a bit (such as duct taping over the holes next to the power supply)
  • flatblastard - Thursday, September 8, 2005 - link

    Duct tape on a brand new case? I don't think so..... Well, I personally wouldn't do it, but for modders/OCers I guess it might make sense.
  • fass mut - Thursday, September 8, 2005 - link

    what's the link to the article?
  • ElFenix - Thursday, September 8, 2005 - link

    all three articles, the first is over main features, the second is an absolutely silent computer, and the third is more mainstream rigs

    http://www.silentpcreview.com/article249-page1.htm...">http://www.silentpcreview.com/article249-page1.htm...
    http://www.silentpcreview.com/article254-page1.htm...">http://www.silentpcreview.com/article254-page1.htm...
    http://www.silentpcreview.com/article255-page1.htm...">http://www.silentpcreview.com/article255-page1.htm...
  • jonp - Thursday, September 8, 2005 - link

    Doesn't an ATX extension cable for $4 cover the power supply to motherboard distance concern? Granted, Antec could have included it with the case; but it's NO big deal to resolve. Shouldn't be an issued when deciding.
  • mjz - Thursday, September 8, 2005 - link

    i hate lian li cases. I spent probably 200 dollars on their case (2 years ago) and it vibrates too much, the sound is pissing me off. I guess it can't handle my raptor or something.
  • Tamale - Thursday, September 8, 2005 - link

    I too agree that way too many of these cases are kinda ridiculous looking, but someone said it best when they said "the Eclipse must look better in person"... it really does. I liken it to those fancy cd players from places like brookstone and the sharper image..

    It's flashy, sure, but at least it's kinda 'classy flashy', if you know what I mean. If that kinda look still doesn't please you at all, there's always cases like the P-180 ;)
  • mkruer - Thursday, September 8, 2005 - link

    Considering that I have a PC-V2000 Plus. I am in a unique position to voice my opinion for everyone reading this thread. I will say that yes the cases Lian Li cases are overly expensive, but considering that they are the only “all aluminum” case manufacture, and they have arguably the best design, they can get away with it. The main issues with an “all aluminum” case is that because aluminum is light then steal and yet does not have the absorbing capacity of plastic, aluminum as rule of thumb tends to be louder. However there are three things you can do o improve the noise ratio of the system. First is to install sound absorbing foam in the case. This will cut down on high pitched noise. Next is to install quieter fans. The Lian Li fans are good, but they are only about average in the noise to air ratio. Finally and this is the biggest thing. In order to cut down on the “wan wan” resonance sound coming form the case you need to suspend the drive is a sling and not it the mounting bays. This by far reduces the most noise.

Log in

Don't have an account? Sign up now