ThermalRock Eclipse (cont'd)

Instead of immediately jumping inside the case, we're going to show just a couple more pictures showing off the side of the Eclipse, as it uses a pretty uniquely-shaped window that really adds to the overall look of the chassis.


Click to enlarge.

All too often, windows on cases are too limiting on what one can see in our opinion, but the Eclipse's side really doesn't suffer from this same shortcoming. Along with giving a great view of the internals, black rivets line the window and an embossed logo also sits there.

As nice as the included "hand screws" are, they aren't even needed to secure the side panel of the Eclipse, since it is also latched at the top and bottom. Just like ThermalTake cases, the side panel of this case removes and attaches so easily that it makes one wonder why they're so clumsy on most cases.


Click to enlarge.

Looking towards the front, this is what we're left with after removing most of the components from the chassis. The large fan in front will help to keep the hard drives cool, and slightly below that is a holding place for the included accessories box.


Click to enlarge.

To get a feel for how the Eclipse holds the other internals, here's a shot of the two main removable cages.


Click to enlarge.

Like the Sonata, this case uses rubber grommets to isolate vibrations from the drives, but unlike the Antec case, these grommets are on the sides of each drive. In the following picture, one can even see how this simple tool-free design can still be very effective at reducing noise.

Once the 3½” drives are installed into their respective cages, they slide along rails until they latch securely into place, with the external cage sliding towards the front and the hard drive cage sliding in from the side.


ThermalRock Eclipse ThermalRock Eclipse (cont’d)
Comments Locked

48 Comments

View All Comments

  • Abecedaria - Sunday, September 11, 2005 - link

    What was the criteria for choosing these cases? Most of them look nasty-plasticy and even the Antec P-180, although it looks good, has a veery plasticy feel.

    Where was Silverstone in your review? They have some of the best cases available:
    http://www.silverstonetek.com/product-case.htm">http://www.silverstonetek.com/product-case.htm
    and from their new subsidiary:
    http://www.tuniq.com.tw/Chassis/chassis.htm">http://www.tuniq.com.tw/Chassis/chassis.htm

    These things rock.

    abc
  • unclebud - Monday, September 12, 2005 - link

    please consider reviewing the performance 640 next time?
    it currently includes a smartpower v2 400w, for $129
    thanks in advance
  • Rudee - Saturday, September 10, 2005 - link

    There is an error in the article. The Sonata II does indeed have a removable air filter in the front of the case, thus should not be given a score of "0" for this catagory.
  • Tamale - Saturday, September 10, 2005 - link

    The filter is removable from the bottom of the case only.. while this certainly is 'removable', it is nowhere near as accessible as the other cases which I gave this point to. I struggled with the idea of giving the case .5 for this category, but it wouldn't have made a difference in the end, and I really don't feel that most users would go through the trouble of tipping the case over just to clean the filter, so no points were awarded.

    Thanks for pointing out the detail though.
  • Rudee - Saturday, September 10, 2005 - link

    The Sonata II case is great. I was able to overclock a AMD 64 3700 to 2700mhz using the stock AMD heatsink and fan with one Panaflo 92mm fan in the duct over the CPU. Temps are great and I ended up returning my Zalman 7700 as I didn't need it.
  • dgkulzer - Friday, September 9, 2005 - link

    After 1 month of use I am very happy with my P180. Assembly does take a bit longer than a standard case if you are trying to hide your cables but that isnt much of an issue to me. I put a Phantom 500 PSU in it and because its longer than most other PSU's I had to replace the lower fan with a thinner model (Nexus 120). I have 4 hard drives in the lower chamber and the Nexus at 5 volts keeps them very cool - I havent had the Phantom fan kick on yet either.

    This is one case that looks better in person than it does in pictures, the pictures make it look like a little fridge or something but it looks pretty sweet on your desk :)
  • mschira - Friday, September 9, 2005 - link

    I guess the two compartment design is great for watercooling. You could put the pump reservoir etc in the lower compartment. If something leaks, the electronic is save.
    I think that's great thing...
    M.
    P.S. onla trouble is where to put the power suply...
  • Griswold - Friday, September 9, 2005 - link

    Kids, having a flashy computer under your desk doesnt make the chicks like you more. Say no to stupid side windows!
  • Tamale - Friday, September 9, 2005 - link

    you seem to forget that most kids who think it would look cool to have the window in the first place probably don't care about girls anyway ;)

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool
  • Griswold - Sunday, September 11, 2005 - link

    quote:

    p.s. - most people (girls included) seem to think my all-acrylic case is pretty cool


    Besides the total lack of EM shielding (which is enough reason to not do what you did, not only because it's not allowed in many countries (I know, I know, US is different, there, the cops wont stop you if your car has only 3 wheels..)), a full acrylic case is a nice show thingie. I just find side windows embarrassing, especially when the rest of the case looks like Optimus Prime's chest armor.

Log in

Don't have an account? Sign up now