GIGABYTE Z590 Aorus Xtreme & Xtreme WaterForce

GIGABYTE's flagship for Z590 is the Aorus Xtreme, with an Xtreme WaterForce model for users with custom water cooling. GIGABYTE has gone for a darker look for Z590 when compared to the Z490 Aorus Xtreme, with an all-black aesthetic that looks clean and stylish. The Z590 Aorus Xtreme WaterForce uses a large custom monoblock, which provides cooling to the CPU and the board's large 20+1 phase power delivery. The general design includes RGB LED lighting, which is installed into the rear panel cover and chipset heatsink.

At the top right-hand corner is a two-digit LED debugger, with a power and reset button embedded within a panel covering a right-angled 24-pin 12 V ATX power input. Covering the rest of the PCB is a plethora of black PCIe armor, which blends the M.2 heatsinks into the design. Coated with armor reinforcement, the Z590 Aorus Xtreme includes three full-length slots with two PCIe 4.0 that can operate at x16 or x8/x8, with a third slot electronically locked down to PCIe 3.0 x4. GIGABYTE includes four memory slots capable of supporting up to DDR4-5000, with a total capacity of up to 128 GB across four memory slots. For storage, GIGABYTE includes three M.2 slots, with one operating at PCIe 4.0 x4, two at PCIe 3.0 x4, with six SATA ports offering support for RAID 0, 1, 5, and 10 arrays.

On the rear panel of both the Z590 Aorus Xtreme and Xtreme WaterForce is dual Thunderbolt 4 Type-C, with eight USB 3.2 G2 Type-A ports and one HDMI video output. A Realtek ALC1220-VB HD audio codec and ESS Sabre ES9018K2M DAC power the five 3.5 mm audio jacks and S/PDIF optical output, while at the left-hand side, GIGABYTE has included a Clear CMOS and Q-Flash Plus button. Finishing off the rear panel is a pair of Ethernet ports, one through an Aquantia 10 GbE controller and the other by an Intel I225-V 2.5 GbE controller, with antenna ports for Intel's AX210 Wi-Fi 6E CNVi.

At the time of writing, GIGABYTE hasn't shared any details on its Z590 models' pricing.

EVGA Z590 FTW GIGABYTE Z590 Aorus Master
Comments Locked

88 Comments

View All Comments

  • DanNeely - Tuesday, January 19, 2021 - link

    I'm a bit surprised they went to an x8 3.0 link on the chipset instead of an x4 4.0 one, even if everything coming off of the chipset is still limited to 3.0 speed.
  • QinX - Tuesday, January 19, 2021 - link

    Might be because it makes routing the traces easier, they don't have to adhere to the PCIe 4.0 signal requirements. Downside would be that more pins are required.
  • scottlarm - Saturday, January 23, 2021 - link

    Now you can get every month extra $23k or more easily by doing work in spare time. start you making dollars EWd 0nline just by follow details here... salary8 . com
  • alexane - Sunday, January 24, 2021 - link

    easy job online from home. I have received exactly $20845 last month from this home job. Join now this job and start making extra cash online. salary8 . com
  • Eskimonster - Saturday, January 30, 2021 - link

    Get out of here liar
  • Tek_Soup - Saturday, January 23, 2021 - link

    Cause intel, didnt make the Z590 Chipset Pcie 4.0 not gigabytes Fault. We can buy new boards again later this year.
  • Chaitanya - Tuesday, January 19, 2021 - link

    Other being quite boring platform , there is noticeable lack of M-ATX offerings.
  • Chaitanya - Tuesday, January 19, 2021 - link

    Also it seems like even with properly finned heatsinks Gigabyte Aorus master requires a fan to cool VRMs which is not a good sign.
  • g85222456 - Tuesday, January 19, 2021 - link

    active fan on Z590? this is not X570 bro you must be joking lol
  • haukionkannel - Wednesday, January 20, 2021 - link

    He is not joking,,,

Log in

Don't have an account? Sign up now