Athlon64 Motherboards: First Look at Chaintech, FIC, and MSI
by Wesley Fink on September 23, 2003 1:03 PM EST- Posted in
- Motherboards
MSI K8T Neo: Athlon64 with Dynamic Overclocking
MSI takes the approach of “everything you could ever want” in their top-line K8T Neo motherboard. As MSI has done in the past, they will likely market a top full-featured K8T Neo series board, and then market one or two scaled down versions of the same board with fewer features and at lower cost. MSI is also using the VIA K8T800 chipset to power its top Athlon64 board.If we were looking at the MSI board in isolation, we could not help but be impressed with the array of options and features that MSI lavishes on this board. In addition to standard fare with the VIA 8237 Southbridge (2 SATA Raid, 8 USB 2.0, and ATA133 IDE), MSI has added Gigabit LAN, Promise 20378 controller (2 SATA plus 1 ATA133), firewire ports, D-Bracket diagnostics, 5.1 audio with rear deck connection for all speakers plus Coax/Optical SPDIF, and round red cables to match the red motherboard. The package is impressive, and it is only when it is compared to a package like the Chaintech ZNF3-150 that it looks a little less than spectacular.
MSI is one of the largest motherboard manufacturers in the world, and recently they have been using a new technology called Dynamic Overclocking with their top-end boards. The K8T does have Dynamic Overclocking, with selectable values to 10% overclock, and the important ability to defeat the D.O.T. and set values yourself if you prefer your own overclocking recipes. All-in-all, the MSI K8T Neo has an impressive array of features, ports and options.
Facebook
Twitter
RSS
12 Comments
View All Comments
Anonymous User - Friday, September 26, 2003 - link
#5I old too, but still keep buing from AMD, Intel is way too expensive for as in Latin America, and give no clear advantage for a programmer/gamer like me.
If you been having problems with AMD, surely your are building AMD chips with PCCHIPs mainboards, and Pentiums with Intel boards, you are a smart guy!
So, if you gonna build a modern PC, you'll experience problems becouse WinXP didn't include drivers for new chipsets, so, for it all going like a charm, you need an Intel Pentium III and a Intel 2001's mainboard, anything newer, you gonna have to look for drivers, whatever the platform you choose.
Wesley Fink - Wednesday, September 24, 2003 - link
#10 -You are absolutely correct in theory. However, when we moved from the Ti4600 to the ATI 9800 PRO, our encoding scores on the P4 went up about 35-45%. Don't ask me why. They did not change on the Athlon, which had led in this area before. That is one of several reasons we will be changing to another encoding benchmark.
If you doubt what I say, check Evan's 20-board 865/875 roundup done with the Ti 4600, then check the retest of some of the top boards we include in our more recent P4 reviews. Evan did the original and the update tests, and I have confirmed his results.
Anonymous User - Wednesday, September 24, 2003 - link
Since when does the video card have ANYTHING to do with DivX encoding? That is a purely CPU and RAM issue, even playback is not influenced too much by the video card anymore (speed not quality...that is an entirely different issue).Zoomer - Wednesday, September 24, 2003 - link
Hey, could you please touch on what DAC chip is powering these setups? A picture would be nice too.Envy 24bit audio would be an utter waste if some crap Realtek codec was used. It would be good if this was highlighted so that motherboard manufacturers catering to the higher end of the market will take notice.
Chaintech apparantly took note of the fact that you guys bashed every single board that had the ATX connector near the board i/o ports. Despite it being a non issue. That thick bundle can be routed so that the interference with airflow is minimised.
Anonymous User - Wednesday, September 24, 2003 - link
Please, please, please stop using Flash for graphs.dvinnen - Tuesday, September 23, 2003 - link
#5: Youe funny. Constant screw ups? It's Intell who has had to have 3 or so recalls over the last 4-5 years. And theres that bug with the Itantic which the only way to fix is to lower the clock to 800 mhz. AMD is the one who keeps screwing up?Wesley Fink - Tuesday, September 23, 2003 - link
#3 and #4 - Thank you. Now corrected.Just before posting we decided to combine the 3 reviews into one larger launch review. Unfortunately I had used the same name for two different pictures and the first one was picked up. There is a socket closeup of the FIC that never made it to the server.
Anonymous User - Tuesday, September 23, 2003 - link
yeah, about the only good thing coming out of this is the price drops soon. Otherwise still the same stupid +-5FPS differences = waste of time/effert to get excited about.i used to love amd, but just got tired of their constant screw ups, so anymore i personally don't care what stupid thing they come out with, i won't waste my time with it.
Perhaps that's cuz i'm older now and have a good job/salary and don't need/care about overclocking and or paying a few bucks more for intel quality/stability. yeah, must be just getting to be an old fogey, cuz this whole amd/intel wanna-be-war doesn't give me a hardon like it used to ;)
Thoreau - Tuesday, September 23, 2003 - link
Correction, Page 11 in the index list. First pic.Thoreau - Tuesday, September 23, 2003 - link
The 2nd page of the FIC section shows a pic from the Chaintech board. Think you got that a little mixed up there.