Kingwin KT-424 Aluminum Case
by Kristopher Kubicki on August 18, 2003 11:18 PM EST- Posted in
- Cases/Cooling/PSUs
Final Thoughts
Performance of this case is not spectacular, but you do get a lot for under $100. When stacked up against the expensive ThermalTake Xaser III or the pricier Kingwin KT-436, the KT-424 does pretty well. We continue to keep a close eye on Kingwin, as they definitely are a worthy adversary to ThermalTake and Lian Li.The little touches on this case are what made it a much better case than it should have been. The rubber hard drive mounts, tool-less bay clips, removable tray and detachable motherboard leads were the 50-cent additions that made the case worthy enough for our recommendation. Of course, we would like to see this case hit the sub $70 range. But give them time, and we are confident that Kingwin can bring themselves to that point. The manual does need some work, especially if Kingwin wants to compete with ThermalTake’s excellent documentation.
Overall, the KT-424 is a well designed, aftermarket case. The price is right and the features are good. Congratulations to Kingwin on another excellent attempt in the consumer enclosure market.
Facebook
Twitter
RSS
18 Comments
View All Comments
KristopherKubicki - Saturday, September 6, 2003 - link
BeanTech doesnt manufacturer the case either. I do not recall the manufacturer off the top of my head, but I am pretty sure its a no-name guy.Kristopher
Anonymous User - Thursday, August 28, 2003 - link
This is the exact same case as the BeanTech BT60B. I know, I bought it about a year ago from GamePC. Don't get me wrong, it's a great case. It was the first case (IIRC) to have rubber hard drive mounting grommets standard. However, the design is a good year old, and other companies have taken BeanTech's design and improved on it (like the Antec Sonata's removable HD trays with rubber grommets).Anonymous User - Monday, August 25, 2003 - link
I have this case and it kicks ass. I was able to fit a radiator and two 120mm fans on the front part of the back panel of the case. Install is easy and runs beautifully. Blacklight, watercooling and still able to benefit from all the glorious features. Only thing they could have done better is include USB front header wires to the clip-and-go feature.KristopherKubicki - Saturday, August 23, 2003 - link
knight, no, just waiting for publishing. dont worry i havent forgotten ;)KnightBreed - Friday, August 22, 2003 - link
So, was the LCD interview/article cancelled or delayed indefinitely?Anonymous User - Friday, August 22, 2003 - link
is the ocsystem the OCSystem Diamond Warp Super 10bay Tower Case anygood and how does it stack up with the Kingwin KT-424KristopherKubicki - Thursday, August 21, 2003 - link
I still dont have a hold of this system. Sorry about the double post.The Antec Lanboy weighs about 13lbs with a power supply. The Kingwin KT-424 weighs 20lbs without a power supply.
I have found no evidence of necesity to ground a hard drive on the outside. Obviously, grounding a power supply over the molex is very important, however.
Kristopher
Anonymous User - Thursday, August 21, 2003 - link
Grounding - if there's grounding in the HD power connecter, then why does the Zalman heatpipe HD cooler have a separate grounding/chassis wire? They say its necessary due to their rubbber grommet mounts...Anonymous User - Wednesday, August 20, 2003 - link
I want to thank the author for writing a good article. I also have a question. I have an Antec lanboy and I really love its weight. The author says the KT 424 is rather heavy. I wonder, how much does it weigh? Or at least, is it as light as a lanboy? Thanks.KristopherKubicki - Wednesday, August 20, 2003 - link
#7, what else would you like me to comment on? Feel free to email me too if you would like. kkubicki@anandtech.comKristopher