Fallout 3 Game Performance

Bethesda’s latest game uses an updated version of the Gamebryo engine (Oblivion). This benchmark takes place immediately outside Vault 101. The character walks away from the vault through the Springvale ruins. The benchmark is measured manually using FRAPS.

The Phenom II X2 555 BE takes the crown here, equalling the performance of the Phenom II X4 955 (as it should since they're the same chip, with a couple cores difference that is).

Fallout 3 - 1680 x 1050 - Medium Quality

 

Left 4 Dead

Zombies? Check. Zombie killing performance:

Left 4 Dead - 1680 x 1050 - Max Settings (No AA/AF/Vsync)

The Phenom II X2 555 BE does very well here again, even besting the Core i3 530. This would appear to be AMD's best gaming CPU thus far. The Athlon II X4 635 does well here since there's not much data sharing among all four cores.

FarCry 2 Multithreaded Game Performance

FarCry 2 ships with the most impressive benchmark tool we’ve ever seen in a PC game. Part of this is due to the fact that Ubisoft actually tapped a number of hardware sites (AnandTech included) from around the world to aid in the planning for the benchmark.

For our purposes we ran the CPU benchmark included in the latest patch:

Far Cry 2 - 1680 x 1050 - Playback (Action Scene) - Medium Quality

Crysis Warhead

Crysis Warhead - 1680 x 1050 - Mainstream Quality (Physics on Enthusiast) - assault bench

PAR2, WinRAR & Sorenson Performance Power Consumption
Comments Locked

63 Comments

View All Comments

  • Alouette Radeon - Wednesday, March 10, 2010 - link

    I didn't want to believe it but you really ARE biased towards Intel! After all the harm they've caused in this industry how could you be? Do they threaten to stop sending you testing material if you don't sound like they're the second coming of Christ and AMD is just a second-rate company?
  • computerfarmer - Monday, February 1, 2010 - link

    Good article.

    Trying to find these to buy. AMD Athlon II x4 635 is the only one I have found available (newegg.ca). I live in Canada.

    Are the rest of them expected soon?
  • th3rdpartynation - Tuesday, January 26, 2010 - link

    I want to build a WHS and the 3 things I consider most important are Video Encoding performance, Low Power, and Price. That being said I have narrowed it down to Athlon II X4 vs Core i3. A matchup I would love to see would be an undervolted Athlon II X4 vs. an Overclocked Core i3. If not then maybe everybody could tell me which they recommend?

  • blowfish - Tuesday, January 26, 2010 - link

    for the video encoding part, that's easy enough - just check out "Bench", and factor in your underclocks and overclocks, since encoding scales fairly well with clock speed for a given cpu.

    Price is easy enough to figure out.

    The i3's probably have the best power/performance.
  • jackylman - Monday, January 25, 2010 - link

    As a fan of silent computing, the 45W TDP quad-core 910e is the most exciting chip in this round, and I don't see it in the power consumption graphs. Disappointed.. :(
  • MrSpadge - Tuesday, January 26, 2010 - link

    You see in the charts that:
    - idle power isn't that much different between the AMDs
    - at load they consume about their "ACP" (former TDP)

    So if you're not running under load the choice doesn't matter. If you run under load you could take any of the current 45 nm CPUs and lower its ridiculously high stock voltage of 1.4 V to maybe 1.2 V at 2.6 GHz. That should get you to maybe 80 W instead of 65 W for the specially binned chips. Close enough I'd say. If it's still too loud: go to 2.5 GHz and lower the voltage again.

    BTW: Core i3/5/7 can be even more energy efficient if you don't push them to 4 GHz.
  • leexgx - Sunday, January 31, 2010 - link

    ACP that AMD use now not very helpful 95w/65w may had just be 125w/95w,

    the Athlon II are far better on heat output (X2 more so) then the Phenom II or the older hotcake 9xxx Phenoms (guessing most due to L3 cache)
  • mindless1 - Saturday, January 30, 2010 - link

    ... but for some purposes you have to look at an o'c system being more efficient, since CPU is only a fraction of total system power consumption and we are free to turn a system off when the tasks are completed.
  • jackylman - Monday, January 25, 2010 - link

    errr 65W
  • Taft12 - Wednesday, January 27, 2010 - link

    If you are a supposed fan of silent computing, I'm surprised you aren't aware that you are better off buying a "standard" AMD CPU for much less and undervolting and underclocking to get even better results (ie. cooler and lower-power-consuming) than buying AMD's e-series (like MrSpadge describes).

Log in

Don't have an account? Sign up now