Higher Clock Speeds, No TLB Issues and Better Pricing: The New Phenom
by Anand Lal Shimpi on March 27, 2008 12:00 AM EST- Posted in
- CPUs
3D Rendering Performance
3dsmax r9
Our benchmark, as always, is the SPECapc 3dsmax 8 test but for the purpose of this article we only run the CPU rendering tests and not the GPU tests.
The results are reported as render times in seconds and the final CPU composite score is a weighted geometric mean of all of the test scores.
The Phenom X4 9850 is once again within 7% of the Q6600 and it's around 11% cheaper, we'd say AMD has a competitive part here. Looking at the Core 2 Quad Q9300 however, we see that if Intel can get its 45nm availability issues solved AMD would have to respond with even better pricing in order to make the X4 9850 as attractive as it is today.
Cinebench R10
A benchmarking favorite, Cinebench R10 is designed to give us an indication of performance in the Cinema 4D rendering application.
We see more of the same under Cinebench: the Phenom X4 9850 comes close to the Q6600, but the Q9300 comparison isn't nearly as close.
POV-Ray 3.7 Beta 24
POV-Ray is a popular raytracer, also available with a built in benchmark. We used the 3.7 beta which has SMP support and ran the built in multithreaded benchmark.
Under POV-Ray the two quad core Intel solutions are a bit much for Phenom to handle, the performance gap widens to over 25% between the Q6600 and the Phenom X4 9850.
Facebook
Twitter
RSS
65 Comments
View All Comments
aju - Thursday, March 27, 2008 - link
Ok, the fastest Phenom is still not quite as fast as the Q6600. The problem is that the cost issues is really much larger than it is made to seem in the article. The review does not really figure the total system price into the equation. The exact parts listed in the review for the test AMD system with an Phenom X4 9850 would cost $864.97. The exact parts listed for the Intel system with a Core2Quad Q6600 would cost $1273.96. Were talking about a difference of $405.99 here. For that price difference, you could forgo the 8800GT and put in 4 Radeon HD 3870s in its place and have quad CrossFire for a total of $1314.94. That MSI board supports 4 PCI Express 2.0 slots. Then we would be comparing systems at a similar price point. I wonder if the Intel system could keep up on the games then.coldpower27 - Thursday, March 27, 2008 - link
The situation would not change dramatically if Intel was changed back to DDR2-800. Intel processors don't benefit significantly if at all from the extra memroy bandwidth.This is a performance of the processor without limitation of other components, not a price/performance article.
IvanAndreevich - Thursday, March 27, 2008 - link
Can we have a bench with the Q6600 running the same FSB and clockspeed as the Q9300? Would be an interesting comparison.Schugy - Thursday, March 27, 2008 - link
Seems like q'n'q 2.0 still isn't working as good as the specs on paper tell us.Nihility - Thursday, March 27, 2008 - link
I'm really disappointed by Intel's 45 nm Q9300.Doesn't overclock as well, less cache and only marginally better performance over the Q6600.
Intel is obviously holding back because AMD can't deliver. I am not amused.
The updated phenoms are nice and all but as an overclocker I'll have to pass on this entire generation from BOTH manufacturers. That and WOW does AMD get owned at the gaming benchmarks.
coldpower27 - Thursday, March 27, 2008 - link
From an overclockers perspective yes, but what's not to like if your buying this product for stock performance, faster then the Q6600 with less cache, and much more efficient energy wise.The only chips that AMD and Intel sell that are geared toward overclocking in mind are AMD's Black Series, and Intel's Extreme Series..
They have no obligation to sell you cheap overclockable processors. If they do it's just very well a bonus.
Nihility - Friday, March 28, 2008 - link
From a stock perspective, it's more expensive than a Q9300 but offers marginal performance gains.I don't like marginal processor upgrades. It's a bad sign when a year later you get sold the same speed processors instead of something that is 50% faster. They could obviously be releasing these processors with much higher clock rates but they choose not to so they have that option to crank performance up another useless 5% if they feel like it.
I don't like being toyed with, can you blame me?
nubie - Thursday, March 27, 2008 - link
Hot Damn! Now I am torn between a 45nm Intel and a Tri/Quad AMD.I guess I can afford to sit back and wait, but this is just awesome news, it seems for professional apps the AMD is actually a better value (well duh), I think the Opteron line will be in high demand, and it will probably be very competitive.
Finally, something that is nearly clock-for-clock competitive with Intel. Now if AMD can only get Dual-core models out in 45nm, then they might be able to compete on level ground in the mainstream segment.
I just don't know which to buy, I hope that the promised AM2 compatibility will finally be here, if not there will be a lot of unhappy motherboard owners (my DFI Infinity M2 sorely needs one of these.)
strikeback03 - Thursday, March 27, 2008 - link
umm, they aren't really clock-for-clock competitive, and no one said they were. Depending on pricing they may be price competitive, but the Q9300 seems to hold a decent performance advantage over the 9850 in most tests shown.mczak - Thursday, March 27, 2008 - link
What was the stepping of the Q6600 core used here? IIRC G0 had significantly lower idle power consumption, and somewhat lower load power consumption than B3.