Digital Photography from 20,000 Feet
by Wesley Fink on September 25, 2006 12:05 AM EST- Posted in
- Digital Camera
Digital Challenges: What Needs to be Improved
Despite the huge leaps in digital technology in the past few years, there are still a few issues remaining. Most of the sensor makers and camera/lens manufacturers are working on these issues. You should keep them in mind when looking at digital SLRs, because they are the areas where development is needed.
Dynamic Range
Compared to film SLRs, digital SLRs still cannot match the dynamic range of film. Dynamic range is the difference between the brightest highlights and darkest shadow detail in an image. Most manufacturers are working very hard to provide improved dynamic range, but there is no consensus yet on what works or will work best to fix this problem. Solutions vary from the extra set of pixels designed just to capture highlight detail in the Fuji S3 PRO (for Nikon lenses), to the Bionz image processor in the new Sony A100 electronics, and the D-Lighting feature in the new Nikon D80 that can be used to improve shadow or highlight detail.
Most users are not really aware of this issue, and sensor and camera makers are not making a big deal about it unless they have a feature that improves this weakness. However, if you examine a high contrast image from film next to the digital image you will see highlights blowing out on the digital image and less shadow detail in the digital image. Digital has improved greatly in this area, and will no doubt continue to improve, but the dynamic range difference is still about 1.5 to 3 stops better with film than digital.
In shopping for a digital SLR you might pay attention to those that claim to address this issues and what they have done.
Dirt on the Sensor
One of the early problems identified by users of digital SLRs with interchangeable lenses was that the sensor could easily get dirty in the process of changing lenses. Unlike film cameras, where this issue went away with a film change, a dirty sensor will make all future photographs spotted with specks. This issue is particularly troublesome in digital cameras, because the sensor coatings are very delicate and the SLR needs to be returned to the manufacturer for cleaning dust from the sensor.
Most manufacturers have software tools to minimize this problem, mathematically "removing the spot and filling in with calculated pixels", but the first manufacturer to address it on the prevention end was Olympus with their wave filter. They provided a protective coating on the sensor and also used ultrasonic vibrations to clean the sensor on start-up to remove any dust that may have gotten through.
Sony also introduced a protective coating and start-up vibration feature to protect from and remove dust on their new 10.2 megapixel A100. Pentax and Samsung have apparently licensed the Sony system, as they have announced similar mechanisms on their new 10.2 Sony-sensor cameras. Even Canon, who denied for quite a while that there was a dust problem, is now providing the "EOS Integrated Cleaning System" on their new 10 megapixel Rebel XTi. The XTi uses special antistatic sensor coatings and an ultrasonic cleaner much like Olympus.
Auto White Balance
White Balance was not really discussed in this introductory guide, but digital cameras, unlike film, allow the user to set the color temperature or color balance of the sensor. With film you had to choose daylight (or flash), tungsten, Fluorescent, and other color balances when you selected film. In digital imaging you select the "color temperature" when you shoot. You can also leave the color temperature on Auto and let the camera choose - or be really fancy and measure color temperature (most SLRs have this capability) and set a Custom temperature.
Most users leave it on Auto, but we have yet to see a digital SLR that does a decent job with common indoor lamps and lights (tungsten) on the Auto setting. Almost all Auto settings seem to leave an orange cast in the images shot under indoor light. This can normally be corrected in images shot in RAW and some images shot as JPEG, but the easiest solution by far would be an Auto setting that really works. The best solution today is to move off the Auto White Balance setting to Tungsten (Indoor Light) when shooting indoors. Today's cameras do generally apply the correct temperature when the tungsten white balance is selected. Until this is fixed in the majority of Digital SLR cameras we plan to test the Auto setting under indoor lighting in our reviews.
Lens Confusion
This guide should help with confusion about lenses and lens factors, but the problem won't go away until camera and lens makers decide on a standard. Right now digital SLRs are still basically fed with 35mm lenses, even though the sensors are APS C and DX size and have a smaller image circle. It appeared for a while that the industry would settle on this APS C/DX size and eventually name lenses by their equivalent APS C/DX focal lengths once 35mm faded away. Now the outcome is less clear. Some now predict the SLR market will move to two tiers, with APS C/DX SLR cameras as mainstream and full-frame 35mm-size sensors at the Pro end. This certainly would maximize the existing 35mm lens line of the big camera manufacturers and still provide an upgrade path for advanced amateurs. This is the path that Canon appears to be following, but Nikon is still committed to the pro APS C/DX sensor size.
If you look closely at the new lenses Sony introduced you will see even more confusion. Sony does not make 35mm film SLR cameras, so there is no reason for them to introduce new lenses designed for 35mm just for the current Minolta film owners. Yet 2 of the 3 new Sony Carl Zeiss lenses are designed for a 35mm image circle. This leads observers to believe that Sony, one of the largest sensor manufacturers in the world, may be hedging their bets on a full-size 35mm sensor Sony SLR. It is also interesting that the major camera makers that have extensive lens lines seem to have slowed their introduction of lenses designed for APS C/DX sensor size. There is no crystal ball, but it will be interesting to see where the digital SLR industry goes in the near future.
The lens confusion and format confusion is likely to continue for a while, since none of the manufacturers except Olympus, with their all-new digital 4/3 system, have truly committed to a new sensor size. If Sony or Nikon introduce a new Pro full-size 35mm sensor in the near future, you can expect the industry to segment as Canon has now done with their 35mm sensor Pro EOS 1D Mark II and EOS 5D versus the rest of the Canon line whish uses an APS C sensor with a 1.6 lens factor.
Gaps in the Lens Lines
Perhaps because of the lens confusion, there are still gaping holes in the lens lines of the APS C/DX format digital SLR cameras. Due to the 1.5/1.6 lens factors the 35mm wide angles are pretty useless on a digital SLR. There is still a need for additional wide angle lenses that are wide angle on APS C/DX. The Sigma 10-20mm and Tamron 11-18mm help, but pickings form the majors are very slim. So are DT size lenses from the majors that address the need for fast fixed-focal-length wide-angles and fast normal lenses. Pentax recently introduced 21mm f3.2 and 40mm f2.8 pancake (flat) lenses for their digital line. Samsung recently announced they would introduce a 35mm F2.0 lens for their digital cameras. These three lenses will bring new options to digital photographers shooting with the Pentax KA mount.
Despite the huge leaps in digital technology in the past few years, there are still a few issues remaining. Most of the sensor makers and camera/lens manufacturers are working on these issues. You should keep them in mind when looking at digital SLRs, because they are the areas where development is needed.
Dynamic Range
Compared to film SLRs, digital SLRs still cannot match the dynamic range of film. Dynamic range is the difference between the brightest highlights and darkest shadow detail in an image. Most manufacturers are working very hard to provide improved dynamic range, but there is no consensus yet on what works or will work best to fix this problem. Solutions vary from the extra set of pixels designed just to capture highlight detail in the Fuji S3 PRO (for Nikon lenses), to the Bionz image processor in the new Sony A100 electronics, and the D-Lighting feature in the new Nikon D80 that can be used to improve shadow or highlight detail.
Most users are not really aware of this issue, and sensor and camera makers are not making a big deal about it unless they have a feature that improves this weakness. However, if you examine a high contrast image from film next to the digital image you will see highlights blowing out on the digital image and less shadow detail in the digital image. Digital has improved greatly in this area, and will no doubt continue to improve, but the dynamic range difference is still about 1.5 to 3 stops better with film than digital.
In shopping for a digital SLR you might pay attention to those that claim to address this issues and what they have done.
Dirt on the Sensor
One of the early problems identified by users of digital SLRs with interchangeable lenses was that the sensor could easily get dirty in the process of changing lenses. Unlike film cameras, where this issue went away with a film change, a dirty sensor will make all future photographs spotted with specks. This issue is particularly troublesome in digital cameras, because the sensor coatings are very delicate and the SLR needs to be returned to the manufacturer for cleaning dust from the sensor.
Most manufacturers have software tools to minimize this problem, mathematically "removing the spot and filling in with calculated pixels", but the first manufacturer to address it on the prevention end was Olympus with their wave filter. They provided a protective coating on the sensor and also used ultrasonic vibrations to clean the sensor on start-up to remove any dust that may have gotten through.
Sony also introduced a protective coating and start-up vibration feature to protect from and remove dust on their new 10.2 megapixel A100. Pentax and Samsung have apparently licensed the Sony system, as they have announced similar mechanisms on their new 10.2 Sony-sensor cameras. Even Canon, who denied for quite a while that there was a dust problem, is now providing the "EOS Integrated Cleaning System" on their new 10 megapixel Rebel XTi. The XTi uses special antistatic sensor coatings and an ultrasonic cleaner much like Olympus.
Auto White Balance
White Balance was not really discussed in this introductory guide, but digital cameras, unlike film, allow the user to set the color temperature or color balance of the sensor. With film you had to choose daylight (or flash), tungsten, Fluorescent, and other color balances when you selected film. In digital imaging you select the "color temperature" when you shoot. You can also leave the color temperature on Auto and let the camera choose - or be really fancy and measure color temperature (most SLRs have this capability) and set a Custom temperature.
Most users leave it on Auto, but we have yet to see a digital SLR that does a decent job with common indoor lamps and lights (tungsten) on the Auto setting. Almost all Auto settings seem to leave an orange cast in the images shot under indoor light. This can normally be corrected in images shot in RAW and some images shot as JPEG, but the easiest solution by far would be an Auto setting that really works. The best solution today is to move off the Auto White Balance setting to Tungsten (Indoor Light) when shooting indoors. Today's cameras do generally apply the correct temperature when the tungsten white balance is selected. Until this is fixed in the majority of Digital SLR cameras we plan to test the Auto setting under indoor lighting in our reviews.
Lens Confusion
This guide should help with confusion about lenses and lens factors, but the problem won't go away until camera and lens makers decide on a standard. Right now digital SLRs are still basically fed with 35mm lenses, even though the sensors are APS C and DX size and have a smaller image circle. It appeared for a while that the industry would settle on this APS C/DX size and eventually name lenses by their equivalent APS C/DX focal lengths once 35mm faded away. Now the outcome is less clear. Some now predict the SLR market will move to two tiers, with APS C/DX SLR cameras as mainstream and full-frame 35mm-size sensors at the Pro end. This certainly would maximize the existing 35mm lens line of the big camera manufacturers and still provide an upgrade path for advanced amateurs. This is the path that Canon appears to be following, but Nikon is still committed to the pro APS C/DX sensor size.
If you look closely at the new lenses Sony introduced you will see even more confusion. Sony does not make 35mm film SLR cameras, so there is no reason for them to introduce new lenses designed for 35mm just for the current Minolta film owners. Yet 2 of the 3 new Sony Carl Zeiss lenses are designed for a 35mm image circle. This leads observers to believe that Sony, one of the largest sensor manufacturers in the world, may be hedging their bets on a full-size 35mm sensor Sony SLR. It is also interesting that the major camera makers that have extensive lens lines seem to have slowed their introduction of lenses designed for APS C/DX sensor size. There is no crystal ball, but it will be interesting to see where the digital SLR industry goes in the near future.
The lens confusion and format confusion is likely to continue for a while, since none of the manufacturers except Olympus, with their all-new digital 4/3 system, have truly committed to a new sensor size. If Sony or Nikon introduce a new Pro full-size 35mm sensor in the near future, you can expect the industry to segment as Canon has now done with their 35mm sensor Pro EOS 1D Mark II and EOS 5D versus the rest of the Canon line whish uses an APS C sensor with a 1.6 lens factor.
Gaps in the Lens Lines
Perhaps because of the lens confusion, there are still gaping holes in the lens lines of the APS C/DX format digital SLR cameras. Due to the 1.5/1.6 lens factors the 35mm wide angles are pretty useless on a digital SLR. There is still a need for additional wide angle lenses that are wide angle on APS C/DX. The Sigma 10-20mm and Tamron 11-18mm help, but pickings form the majors are very slim. So are DT size lenses from the majors that address the need for fast fixed-focal-length wide-angles and fast normal lenses. Pentax recently introduced 21mm f3.2 and 40mm f2.8 pancake (flat) lenses for their digital line. Samsung recently announced they would introduce a 35mm F2.0 lens for their digital cameras. These three lenses will bring new options to digital photographers shooting with the Pentax KA mount.
Facebook
Twitter
RSS
81 Comments
View All Comments
ic144 - Monday, September 25, 2006 - link
why don't we all just head over to http://www.dpreview.com">www.dpreview.com?silver - Monday, September 25, 2006 - link
Some people appreciate diversity in opinion. Take me for instance. I would prefer to read three reviews on a motherboard and come to my own consensus prior to actually purchasing said motherboard.tsapiano - Monday, September 25, 2006 - link
Overall a very good article, however there is one major points that I'd like to address here. The conclusion page (under 'Lens Confusion') makes the following statement:Focal length is a physical property of the lens itself - it is not affected by the size of the sensor. While the field of view (and hence behaviour) of a given focal length changes based on the size of the imaging plane that doesn't change the fact that the focal length remains the same. As this article notes, each format (8x10", 4x5", 6cm, 35mm, APS, etc.) uses different focal lengths for different purposes so the 35mm vs. 24mm (APS/DX) change is no different ;)
'Equivalent' focal lengths are useful as a transitional aide, but if the 35mm format fades away, then why would we want to base things on being equivalent to an obsolete format? For a new user comming into the DSLR market, it would seem just as easy to teach them that a '35mm lens is a normal' rather than trying to explain how focal lengths were used on a format that they aren't using ;) Naturally, for users comming from the 35mm space it might be easier to use the equivalent numbers - however that is only a problem durring the transition period.
Conversely, if the market moves toward a tiered system with professional equipment using 35mm sensors and consumer equipment uses APS-C then using 'equivalent' focal lengths will simply create more confusion. For instance, if an APS camera user were to buy a professional lens (that will be labeled with the real focal length) their consumer equipment (which is labeled with an 'equivalent' focal length) will be marked differently. IMHO simply telling users to multiply all focal lengths by 1.5x is much easier than explaining that a professional 100mm lens produces the same FoV as a consumer 150mm lens ;)
Wesley Fink - Monday, September 25, 2006 - link
I basically agree with you. My only concern here is that the "digital" lenses designed for the DX format will not provide a full image on a 35mm camera. You also quickly find that the 28mm to 80mm lens is NOT a wide-angle to short tele when mountd on a digital SLR. Then there is the exotic sounding 18-55mm kit lens that behaves on a digital SLR like a 28mm-85mm lens and that most definitely will NOT operate as a full-frame 18mm on a 35mm camera.tsapiano - Monday, September 25, 2006 - link
True, but if you label a 12-24mm DX lens an 18-36mm 'equivalent' lens and put it on the shelf beside a 17-35mm FF lens you're bound to confuse people even more. The 17-35 will also mount on an APS camera, but it will provide the eqivalent of a 25-50mm lens - however with the differential labeling, it may appear that it would be wider than the DX lens. If you just stick with the real focal length of the lens, then you give people a better idea of their relative reach.
But that's the fundamental problem - the only reason we relate 18mm as an ultra-wide focal length is that we're still used to shooting with 35mm. People with this level of experience generally can figure this stuff out relatively easilly - the people who have trouble with it are generally those just starting out. For someone who has never used 35mm, however, 18mm doesn't really mean much other than what they are told - simply telling them that 18mm is a moderate wide angle is much simpler than trying to explain 'equivalence' to a format they've never used (and likely never will) ;)
As for mounting an 18-55mm lens on a full-frame camera, you'd still get the same FoV as a full-frame 18mm lens it'd just be that the edges would have extreme vinetting so the image would be difficult to make use of. Either way, it's easier to explain 'don't put DX/EF-S/etc. lenses on a FF camera' than it is to explain why the APS 18-36mm lens is much wider than the FF 17-35mm lens ;)
Regardless, I certainly understand what you are saying ;) The caveat is that the vendors are kind of stuck between a rock and a hard place. They could rebrand APS lenses with equivalent focal lengths, however (a) that creates confusion with full-frame lenses also in their lineup (which for most vendors is the vast majority of their lines) and (b) it means that they'll be stuck using this 'equivalent' nomenclature long after most consumers forget what 35mm was ;) If they stay with the real focal lengths, it creates some confusion in the short term, but it allows them to use a standard designation across their entire lineup and will eventually become a non-issue once people get used to it.
Purhaps the easier solution would be to simply place FoV angles alongside the focal length designations on the lens barrel. The concept of a 45 horizontal degree field of view would likely mean a whole lot more to the average consumer than saying a 28mm lens on an APS-C body ;)
silver - Monday, September 25, 2006 - link
I never did understand why manufacturers didn't simply go with a magnification factor. A normal lens would be a 1X which would be the equivalent of the diagonal of the film/CCD/CMOS. A 0.5X would be half the diagonal and so forth. The only issue I can see would be in considering the perspective of the subject to the surroundings in the image. Not a huge concern when using focal lengths in the 0.5X ~ 4.0X range though admitedly there are a huge number of cameras with lenses that zoom well beyond those parameters.Visual - Tuesday, September 26, 2006 - link
well obviously its because the manufacturers have no clue on what camera you'll strap the lenses and what their film/sensor diagonal will be.silver - Tuesday, September 26, 2006 - link
In that case they really need to hire better engineers if they don't know what size the CCD's in their own cameras are !Note that this all points out the need for some standardization as well. Standardization is in the best intrest of the consumer as it opens up competition. This is why PC sell 99:1 versus Mac. Mac has completely alienated a lot of their user base by persistently changing their architecture. Something they seem determined to keep doing.
Lastly, the mangnification would be indicated based on the lenses targetd system. A lens designed for use on a Canon full-frame system would simply need to be stamped differently for use on a Nikon. The lenses aren't interchangeable unless one uses a lens mount such as the Tamron Adaptall that has seen very modest use in the past on 35mm cameras.
wgoldfarb - Monday, September 25, 2006 - link
Sorry for the very long post, but photography is a subject that is close to me and I was left with some very mixed feelings after reading your article. I have been a "prosumer" photographer for over 25 years, with some professional work thrown-in a long time ago. I just switched to 100% digital not too long ago, so naturally I was excited to hear AT was starting a digital photography section. As a newbie when it comes to computers and overclodcking I have come to admire your incredibly thorough reviews and articles for computer hardware, and was looking forward to the same level of depth and knowledge in photography. However, I must admit that after reading this article I was somewhat disappointed.Overall the article is excellent, as is usual with AT. But in the article you also send some mixed messages, and say some things that affect your credibility.
You start by saying that most computer enthusiasts don't know enough to understand the "jargon" used by traditional review sites. However, you are also focusing on digital SLRs which can cost $500 and more once you include the body, lens and other required accesories. Anyone seriously considering such an SLR (instead of a cheaper, simpler point-and-shoot) almost certainly already knows enough about photography to understand the "jargon", or at least can easily learn it with some research. This is a double standard. You say most photography sites use language that is gibberish to a non-photographer. Guess what: your own reviews of hardware are gibberish to most computer newbies, and even to some more knowledgeable users. Yet this is precisely why you offer great reviews. Assuming some prior knowledge on the part of your reader allows you to focus on incredibly detailed, in-depth reviews of hardware. That is, to me, one of your greatest values. I can learn the basics anywhere, but only here can I find such outstanding in-depth reviews or a community of incredibly knowledgeable users. Yet for photography you are suggesting you will target a comparably less informed user. I think this underestimates the knowledge of your community. In addition, catering to such an audience will limit the technical depth of your reviews. I'd much rather see you target a more informed user (maybe provide some guides to allow newbies to learn the jargon?) and concentrate on the same level of technical depth you currently have in hardware, along with jargon, gibberish and all. Anyone can provide a basic review of equipment, be it computer hardware or digital SLRs. Very few people can provide truly in-depth, reliable, technical reviews, and I think this is where AT can stand out from the rest.
You also make some comments that could affect your credibility. As an example, on page 1 you say "In the end taking a digital photo is still basically dependent on the same set of 'rules' as taking a film image, as the only real difference in digital and film is what happens after the image is captured". This is not accurate. As a very important example, the nature of digital sensors has a significant impact of how you expose an image for digital capture. Yes, you could just point and shoot with a digital camera, but you would not be getting the most out of your image or equipment. Given the nature of digital sensors, with digital cameras you need to "expose to the right" to maximize the amount of detail you can capture (i.e. you need to overexpose your image somewhat). You also need to think carefully about the format you will use to store the image on the camera (which may impact quality and definitely impacts the amount of post-processing you may need), and must make careful decisions on white balance before taking the picture. There is an inherent difference between film and digital sensors, and they do affect how you take pictures even before you release the shutter. Look at it this way: if a newbie was about to purchase some DDR2 1066 RAM only to permanently run it at DDR2 553 speeds you would almost certainly suggest that he/she learn enough to overclock his system and leverage the RAM to its fullest, or else you would suggest that he/she not waste the money on such expensive memory. It is no different with digital cameras. If someone pays upwards of $500 for an SLR ,he/she should learn enough to use it to its full potential, and not just use it as a film camera or a point-and-shoot digital.
Having said all this, I think you could offer a great digital photography review section if you stick to what you do best: in-depth, reliable, highly technical reviews of equipment, with your own benchmarks and testing techniques. People can learn the basics anywhere, but here they would find great in-depth reviews not available elsewhere. You go into incredible detail, testing and benchmarking when evaluating the performance of a GPU, and certainly use lots of very technical "jargon" that allows you to offer outstanding reviews, without worrying about catering to less informed users. Those users (including me) usually do their basic research to learn the jargon before reading your reviews. Why would you not apply the same high standards when reviewing digital SLRs?
Moving on to the type of tests, I would love to see extensive batteries of tests covering a wide range of factors, similar to what you now do with hardware. Conduct tests of cameras using identical images that we can compare across cameras and Brands. If testing an SLR body, use a reference high-quality lens so that lens quality is not a factor in the captured image, again allowing us to compare different camera bodies. Develop tests to measure noise at higher ISOs (a potential issue with smaller sensors, such as those in the 4/3 system pioneered by Olympus). Evaluate the time it takes for an image to be written to the camera's storage media at different formats, and how that impacts the ability to shoot continuous frames. If the camera has a built-in flash, evaluate the effectiveness and range of the flash. Look at the available lens offerings for a given body (which, as you correctly point out, can sometimes have a greater impact on image quality than the number of pixels on the sensor). Evaluate the quality of "kit lenses" (by comparing their images to those of the reference lens). Evaluate the in-camera software (e.g. how well does the auto white balance work under different lighting conditions? How well does the camera "process" the raw image to convert it to a jpg?). The list could go on and on, even without going beyond just cameras. There are numerous relevant factors to test in a digital camera, I just touched on a few. There is LOTS of room for thorough, in-depth, technical reviews that you would not be able to offer if you cater to a less informed crowd. And there certainly is room for a website such as AT to conduct these detailed, thorough reviews, using your experience with hardware testing to provide a level of thoroughness and detail that is simply not available elsewhere.
Wesley Fink - Monday, September 25, 2006 - link
You bring up some interesting points, and they are points the staff at AT are still debating. You might find it interesting that almost all the AT Editors thought this introductory guide was possibly too technical. Several commented that they really had to pay attention to get the technical details I was discussing. This is from Editors who write those technical computer equipment reviews you enjoy here. I was worried it was too basic since I didn't even cover things like lens perspective and color balance, in the interest of keeping the size more managable and the article more readable.Our real issue with Digital Cameras is knowing which audience to address. We do understand there are readers that are vey knowledgable in digital photography, but there are also readers who know next to nothing about digital cameras. AT is known as a computer equipment review site, so if we sometimes go too far on the technical side of computer testing it is normally forgiven. However, based on our Editors and questions from readers, we really think we need to aim our Digital Camera reviews at a slightly lower common denominator.
We will likely test and talk more about where various digital photo technology is useful and the best use for certain equipment and cameras than other photo reviews. This will likely be below what you want in the beginning, but if the demand is there we will move to ever more extensive benchmarking as the section evolves.
As for your experience with the sensor in your camera, it appears to be camera/sensor specific. I could make the same argument for every film that exists - they all respond best to certain exposure techniques and those techniques differ depending on the film. However my personal experience has been the opposite of yours - blown highlight from overexposure are much more an issue than underexposure in digital, since I can usually correct shadow detail in Photoshop and I can't always recover blown highlights. Yes, white balance adjustments can be made on the fly with digital and ISO can be adjusted on the fly, which is very unlike film. However, white balance and ISO just work at a different point in digital, and they stil mean the same thing. No we don't have the added latitude of the print process as film does, but we have a similar and even greater latitiude with post processing in Photoshop or other image-editing software.
While I do agree that anyone using only point and shoot is not getting all they can from the camera I also believe strongly that you can still get a lot of quality out of your digital camera on Auto when it is backed by some knowledge. I would also bet you that the great majority of our readers who use digital cameras generally use auto - even with SLRs - and only once in a while go off the program for special situations. I learned this the hard way trying to help our other "geek" editors who almost all own SLR cameras they bought themselves, but who really struggled to take decent photos for our reviews. Once they were given a few tips on lenses to use for available light and how to control depth of field their photos instantly improved = and they almost all still use auto.
Your suggestions for tests and benchmarks are appreciated, and we will definitely consider those as we determine how we will move forward in reviewing Digital Photography equipment.